Water based synthetic polymers for sand and soil stabilization, 10 litres, from 5S

How to use 5SP (4) very, very easy steps?

1. First, clean and level the place and prepare it as you like

2. After that, prepare a tank, a water pump, and a cartridge, preferably a sprayer

3. Add water to the material, and stir together for (3) minutes. For your information, each liter of the material requires (12) liters of water, for example:

Specifications: 10 liter gallon

Quantity of water required: 120 liters of water

The amount of material ready for use after adding water to the gallon: 130 liters of material

The area to be covered or installed: 36 to 40 square meters

4. Then spray the ready-to-use material on the sand and soil at a rate of 4-5 liters per square meter and see the results after 5 days.

Usage tips:

The material is environmentally friendly and does not pose any risks, but I prefer to wear gloves and protective glasses because you are precious to us, and if the material gets on your body, wash it immediately with water before it dries.·